BTR BTR-TURBOSTG1 Stage 1 Twin Turbo Camshaft V2 GM Gen III-IV LS

Description

Stage 1, Stage 2, Stage 3, and Stage 4 Twin Turbo V2 Camshafts available, Turbocharged Hydraulic Roller Style, Designed to be used in a wide variety of street and strip applications, Fits Chevy / GM Generation 3-4 LS Engines, 3-Bolt
BTR BTR-TURBOSTG1 Stage 1 Twin Turbo Camshaft V2 GM Gen III-IV LS
Sku # 36980023-STAGE1
Mfr. Part # BTR-TURBOSTG1
Condition
New
Brand
BTR
Sold
Each
Details
Info
Developed in house, we went back to the drawing board in search of more power and torque, even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
Stage 1, Stage 2, Stage 3, and Stage 4 Twin Turbo V2 Camshafts available
Turbocharged Hydraulic Roller Style
Designed to be used in a wide variety of street and strip applications
Fits Chevy / GM Generation 3-4 LS Engines
3-Bolt
Stage 1
217/22X .616"/.616" 113 LSA
Good for 5.3s and 6.0s with cathedral port heads and factory or aftermarket long runner intakes, it also gives great results in LS3 headed applications as well. At the end of the day, if you're hanging a smaller 62-75mm turbo on your LS-based build ,and plan on putting some street miles on it, the Turbo Stage 1 is hard to beat.
Stage 2
220/23X .618"/.618" 113 LSA
The old Stage 2 had proven to be an excellent camshaft choice for cathedral port headed 5.3s and 6.0s utilizing a wide range of different turbos. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards. Whether you're putting together a budget street build with a small 7275 turbo or aiming for the fences with a Borg Warner S485, this camshaft will make sure the valve events are optimized for your pressurized application.
Stage 3
224/23X .618"/.618" 114 LSA
The new BTR Turbo Stage 3 V2 cam was designed to bridge the gap between street and strip applications . The old Stage 3 had proven to be an excellent camshaft choice for cathedral port headed 5.3s and 6.0s utilizing a wide range of different turbos. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
Do you have a lightweight setup with a powerglide + 5.3/6.0 that's being pressurized by an S400 (or similar size) turbocharger? If so, this cam will have you lighting the win lamps on race day.
Stage 4
227/24X .618"/.618" 115 LSA
The new BTR Turbo Stage 4 V2 cam was designed for use in serious effort stock stroke applications spinning over 8000rpm with supporting valvetrain components. For you folks who may have a ~408" bottom end spinning it in the 6400-6800rpm range, this new cam will also be a very good fit. Developed in house, we went back to the drawing board in search of more power and torque ,even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
Paired to an S400 frame (or similar size), this camshaft will help you move some serious air. Regarded as the BIG STICK of our turbo cam lineup, the Stage 4 is here to knock it out of the park.
Specs
Sold in Quantity
Each
Gear Attachment
3-Bolt
Lobe Separation
113
Camshaft Type
Hydraulic Roller
RPM Range
4000-7000
Exhaust Duration (.050" Lift)
22X
Intake Duration (.050" Lift)
217
Intake Valve Lift w/ Rocker Arm Ratio
.616
Exhaust Valve Lift w/ Rocker Arm Ratio
.616
MFG. Part #
BTR-TURBOSTG1
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.