Fluke Calibration 5615-6-B Secondary Standard PRT Probe, Bare Wire

Description

Subscribe to Our Newsletter
Fluke Calibration 5615-6-B Secondary Standard PRT Probe with Bare Wire, 6 in. x .188 in., -200 °C to 300 °C, 6 ft. Lead
Brand:
Fluke Calibration
Model No:
5615-6-B
Ref No:
3002676
Our Model No:
56156B
Product Overview
Features
Termination: Bare wire
Temperature range: -200 °C to 300 °C
Nominal resistance at 0 °C: 100 Ohm ± 0.10 Ohm
Temperature coefficient 0.0039250 Ohm/Ohm/°C
Accuracy (includes calibration and 100 hr drift (k=2)): ±0.024 °C at -200 °C; ±0.012 °C at 0 °C; ±0.035 °C at 420 °CC
Short-term repeatability (three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k=2)): ±0.009 °C at 0.010 °C
Drift (After 100 hrs at max temp, 95 % confidence (k=2)): ±0.007 °C at 0.010 °C
Sensor length: 28 mm (1.1 in.)
Sensor location: 6.9 mm ± 3.3 mm from tip (0.27 in. ± 0.13 in.)
Sheath dimensions: 152 mm x 4.76 mm (6.0 in. x 0.188 in.)
Sheath diameter tolerance: ±0.127 mm (±0.005 in.)
Sheath material: Inconel 600
Minimum insulation resistance: 1000 MOhm at 23 °C
Transition junction temperature range (temperatures outside this range will cause irreparable damage; for best performance, transition junction should not be too hot to touch): -50 °C to 200 °C
Transition junction dimensions: 71 mm x 13 mm dia (2.8 in. x 0.5 in.)
Maximum immersion length: 102 mm (4 in.)
Response time (Per ASTM E 644): 9 seconds typical
Self heating (in 0 °C bath): 50 mW/°C
Lead-wire cable type: PTFE insulated with PTFE jacket, 22 AWG
Lead-wire length: 183 cm (72 in. or 6 ft.)
Lead-wire temperature range: -50 °C to 200 °C
Calibration: NVLAP-accredited calibration included, lab code 200706-0
Description
The Fluke Calibration 56156B Secondary Standard PRT Probe with Bare Wire, 6 in. x .188 in., -200 °C to 300 °C, 6 ft. Lead has an Inconel 600 sheath that is 152 mm (6 in.) long and 4.76 mm (0.188 in.) in diameter. It is a secondary reference temperature standard designed to bridge the gap between the highest laboratory standards and industrial or second-tier lab locations. It has accuracy of ± 0.012 °C at 0.01 °C.
The element is constructed of reference-grade platinum wire (99.999% pure) for excellent stability. The wire is wound into a coil and placed in a mandrel where it is uniformly supported in a manner that virtually eliminates hysteresis. The electrical configuration is a four-wire current-potential hookup that eliminate the effects of lead-wire resistance.
This Inconel-sheathed probes has a fully supported sensing element, making it more durable than an SPRT. The element is protected in an ultra-high-purity ceramic case with a hermetic glass seal to improve output stability by locking out moisture and contaminants.
The Fluke Calibration 5615-6-B comes calibrated with ITS-90 coefficients, making it compatible with many excellent readout devices, including Fluke Calibration's 1529 Chub-E4, 1560 Black Stack, and 1502A Tweener. It bridges the gap between a 100-ohm industrial RTD and an SPRT.
Included Components
1 - Coefficient Sheet
1 - User Manual CD
1 - Certification Sheets
Terms & Conditions
Please note estimated delivery time above. Contact us for details or if you have a delivery requirement. We ask for your patience while striving to ensure your shipment arrives quickly and accurately.
Domestic Shipping
FREE Standard Shipping on items OVER and less than 30lbs to continental U.S. Add for AK, HI, or PR. Please contact us for shipping rates to any overseas US territories including: Northern Mariana Islands, Guam, Puerto Rico, U.S. Virgin Islands and American Samoa.
PO Boxes/APOs require USPS shipping and may therefore experience longer lead times
6.25% Sales Tax for shipping to MA
International Shipping
Due to international voltage requirements, please ask us prior to purchasing to confirm your product will operate correctly in your country.
Please contact us for shipping rates to any overseas U.S. territories.
International customers are responsible for all shipping charges, including any duties or taxes.